Acne instrument beauty cleansing instrument

The XPREEN electric micro-crystal blackhead suction device is designed to help remove facial blackheads, excess oil and impurities using vacuum adsorption with adjustable suction levels.

Key Features

• Imported air pump with strong suction to help remove facial blackheads and acne
• Three levels of suction power that can be adjusted, suitable for different skin types
• Four probes with multiple functions: remove blackheads, remove acne, remove grease, remove dead skin cells, fade fine lines, lift and tighten
• Color light beauty lamp beads: blue light helps control oil and shrink pores to improve acne problems, green light helps repair tissue cells
• Large-capacity lithium battery, fast charging, can be used for 3 weeks when fully charged (calculated based on 2 times a week, 5 minutes each time)
• Charging indicator to clearly show charging status
• PC body material, compact and portable, body can stand
• Vacuum adsorption to avoid hand squeezing, clean and hygienic
• Product size (mm): 165*40*40mm

Steps to Remove Blackheads

1. Use cleansing products to clean your face. It is recommended to use a blackhead extractor or a hot jet steamer to help open the pores (when the pores are closed, the effect of the product will be reduced).
2. Put the isolation pad into the nozzle groove on the top of the fuselage, select the probe, and install the probe on the nozzle on the top of the fuselage.
3. Short press the power button to turn on the blackhead removal function, the default is soft mode.
4. According to personal situation, short press the power button in turn to select the appropriate gear (when using it for the first time, it is recommended to use your forearm to test the suction first, and then act on the facial skin).
5. Place the instrument probe on the part of the face where the blackheads need to be removed, move the probe slowly, do not stay at the same part for too long, and suck out the blackheads (please do not press the probe hard or pull the probe vertically to avoid straining the skin).
6. After the blackheads are cleaned up, short press the key to turn off the blackhead removal function.
7. Remove the probe, wipe off the dirt with a cotton swab, then rinse the probe with clean water, towel dry or air dry (please avoid washing the body or soaking in water).
8. After the pores are cleaned, long press to turn on and off the IPL function. Irradiate the color light beads on the blackhead acne area for 3-5 minutes, the color light has a timing function, and the color light will automatically go out when it works for 5 minutes. Continue with skin care steps, such as applying facial mask, pore astringent, essence lotion, cream, etc.

Charging Operation

• Charging time: about 1.5 hours (not more than 8 hours)
• Use a 5V1A adapter (the adapter needs to be purchased by the customer), connect the charging cable to the adapter and the product charging port, and the red indicator light is always on at this time
• When fully charged, the battery indicator will change to blue light, just unplug the charging cable (the red light will flash for a few seconds when the battery is low, and then go out)

Tips

• In order to better clean the pores, before use, it is recommended to use a blackhead extractor or a hot jet steamer to help open the pores (when the pores are closed, the effect of the product will be reduced)
• Do not press the probe forcefully or pull the probe vertically, and do not stay at the same part for too long to avoid straining the skin (improper use may cause facial redness, which will subside naturally in a few days)
• Please avoid washing the body, soaking in water or other liquids
• Do not use chemicals to clean the instrument to avoid corrosion
• After each use, the probe needs to be cleaned to avoid clogging the filter. If alcohol is used, the recommended concentration is less than 70%

Drive mode: lithium battery